TEAC DP-008 DP-008 Owner's Manual - Page 46
Reverb, wheel to adjust
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6 - Basic Recording Set the track EQ using the EQ SETTING screen. 1 Press the EQ key to open the EQ SETTING screen. NOTE When track EQ is ON for a track, the track is shown on the Home Screen as in the illustration below. 2 Set the track EQ (equalizer). The track equalizer has the following parameters. Parameter Setting value EQ-SWITCH (track EQ ON/OFF switch) (Default: OFF) Hi-F (high frequency 1.7 kHz - 18 kHz range) (Default: 5 kHz) Hi-G (high range gain) ±12 dB (Default: 0.0 dB) Lo-F (low frequency 32 Hz - 1.6 kHz range) (Default: 350 Hz) Lo-G (low range gain) ±12 dB (Default: 0.0 dB) Use the F1 (˙) and F2 (¥) keys to switch tracks. Use the F3 (§) and F4 (¶) keys to select parameters. Use the DATA wheel to adjust the parameters. 3 After making the track EQ settings, press the HOME key to return to the Home Screen. Track EQ is ON Reverb This unit has six types of reverb effects. Adjust the level of the signal sent to the reverb effect from each track by using their REVERB knobs. The signals are sent to the reverb effect after track EQ (equalizer) is applied. 1 Press the REVERB key to open the REVERB SETTING screen. 2 Adjust the reverb settings for the following parameters. Parameter TYPE Setting value Hall 1/Hall 2/Room/ Studio/Plate 1/Plate 2 (Default: Hall 1) 46 TASCAM DP-008