TEAC DP-008 DP-008 Owner's Manual - Page 70
Reformatting the FAT partition, Initializing SD cards
View all TEAC DP-008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
10 - SD Card Management Reformatting the FAT partition You can also reformat just the FAT partition. The size of the FAT partition cannot be changed. CAUTION You cannot undo this operation! All data on the FAT partition will be erased, so be certain that you will not lose anything important when reformatting. 1 When the recorder is stopped, press the MENU key to open the MENU screen. 2 Turn the DATA wheel to select CARD, and press the F4 (¥) key to open the CARD menu screen. 3 Turn the DATA wheel to select FAT REFORMAT, and press the F4 (¥) key. A pop-up message warning that all data on the FAT partition will be erased appears. Initializing SD cards If you want to use an SD card that was used with this unit, we recommend that you initialize it. When you initialize an SD card, the entire card is formatted as FAT32. 1 When the recorder is stopped, press the MENU key to open the MENU screen. 2 Turn the DATA wheel to select CARD, and press the F4 (¥) key to open the CARD menu screen. 3 Turn the DATA wheel to select the SD INITIALIZE item and press the F4 (¥) key. A pop-up message warning that all data on the card will be erased appears. 4 Press the F3 (YES) key to reformat the FAT partition. •• When reformatting finishes the CARD menu screen reopens. •• To cancel reformatting, press the F4 (NO) key. 4 Press the F3 (YES) key to initialize the entire card and format it as FAT32. •• To cancel initialization, press the F4 (NO) key. NOTE After initializing an SD card, it is necessary to format it if you want to use it with the DP-008 again. (See "Formatting SD cards" on page 33). 70 TASCAM DP-008