TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 105
QoS Commands, qos, qos cos
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Chapter 13 QoS Commands QoS (Quality of Service) function is used to optimize the network performance. It provides you with network service experience of a better quality. qos Description The qos command is used to configure the prority based on port. To return to the default configuration, please use no qos command. Syntax qos tc-id no qos Parameter tc-id -- The priority of port. It ranges from 0 to 3, which represent TC 0 -TC 3 respectively. By default, the priority is TC 0. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) User Guidelines Port priority is one property of the port. When the port priority is specified, the data will be classified into the egress queue based on the tc-id value of the ingress port. Example Configure the priority of port 5 as 3: T1500-28PCT(config)# interface fastEthernet 1/0/5 T1500-28PCT(config-if)# qos 3 qos cos Description The qos cos command is used to enable the mapping relation between IEEE802.1P Priority and TC egress queue. To disable the mapping relation, please use no qos cos command. 94