TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 93
interface gigabitEthernet, User Guidelines, Example, Description, Syntax, Parameter, Command Mode
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
User Guidelines Command in the Interface Range fastEthernet Mode is executed independently on all ports in the range. It does not effect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface Range fastEthernet Configuration Mode, and configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list: T1500-28PCT(config)#interface range fastEthernet 1/0/1-3,1/0/6-7,1/0/9 interface gigabitEthernet Description The interface gigabitEthernet command is used to enter the interface gigabitEthernet Configuration Mode and configure the corresponding Gigabit Ethernet port. Syntax interface gigabitEthernet port Parameter port -- The Fast/Gigabit Ethernet port number. Command Mode Global Configuration Mode Example To enter the Interface gigabitEthernet Configuration Mode and configure Gigabit Ethernet port 27: T1500-28PCT(config)#interface gigabitEthernet 1/0/27 interface range gigabitEthernet Description The interface range gigabitEthernet command is used to enter the interface range gigabitEthernet Configuration Mode and configure multiple Gigabit Ethernet ports at the same time. Syntax interface range gigabitEthernet port-list 82