TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 22
Interface Configuration Mode
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Mode Accessing Path Prompt Logout or Access the next mode Use the interface fastEthernet/gigab it Ethernet Interface Configuration port or interface range fastEthernet/ gigabit Et hernet port-list Mode command to enter this mode from Global Configuration mode. VLAN Configuration Mode Use the vlan vlan-list command to enter this mode from Global Configuration mode. T1500-28PCT (config-if)# or T1500-28PCT (config-if-range )# T1500-28PCT (config-v lan)# Use the end command or press Ctrl+Z to return to Pri vileged EXEC mode. Enter the exit command or the # command to return to Global Configuration mode. A port number must be specified in the interface com m and. Use the end command or press Ctrl+Z to return to Pri vileged EXEC mode. Enter the exit command or the # command to return to Global configuration mode. Note : 1. The user is automatically in User EXEC Mode after the connection between the PC and the switch is established by a Telnet/SSH connection. 2. Each command mode has its own set of specific commands. To configure some commands, you should access the corresponding command mode firstly. Global Configuration Mode: In this mode, global commands are provided, such as the Spanning Tree, Schedule Mode and so on. Interface Configuration Mode: In this mode, users can configure one or several ports, different ports corresponds to different commands a). Interface fastEthernet/gigabitEthernet: Configure parameters for a Fast/Gigabit Ethernet port, such as Duplex-mode, flow control status. b). Interface range fastEthernet/gigabitEthernet: The commands contained are the same as that of the Interface fastEthernet/gigabitEthernet. Configure parameters for several Ethernet ports. c). Interface link-aggregation: Configure parameters for a link-aggregation, such as broadcast storm. d). Interface range link-aggregation: Configure parameters for multi-trunks. e). Interface vlan: Configure parameters for the vlan-port. 11