TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 33
switchport pvid, show vlan summary
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Parameter vlan-list -- Specify IEEE 802.1Q VLAN ID list, ranging from 2 to 4094, in the format of 2-3, 5. It is multi-optional. tagged | untagged -- Egress rule,untagged or tagged. Tagged: All packets forwarded by the port are tagged. The packets contain VLAN information. Untagged: Packets forwarded by the port are untagged. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Add port 4 it to VLAN 2 and configure the type of port 4 as tagged: T1500-28PCT(config)# interface fastEthernet 1/0/4 T1500-28PCT(config-if)# switchport general allowed v lan 2 tagged switchport pvid Description The switchport pvid command is used to configure the PVID for the switch ports. Syntax switchport pvid vlan-id Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Specify the PVID of port 2 as 2: T1500-28PCT(config)# interface fastEthernet 1/0/2 T1500-28PCT(config-if)# switchport pvid 2 show vlan summary Description The show vlan summary command is used to display the summarized information of IEEE 802.1Q VLAN. 22