TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 115
Port Isolation Commands, port isolation, show port isolation interface
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Chapter 15 Port Isolation Commands Port Isolation provides a method of restricting traffic flow to improve the network security by forbidding the port to forward packets to the ports that are not on its forwarding port list. port isolation Description The port isolation command is used to configure the forward port list of a port, so that this port can only communicate with the ports on its port list. To delete the corresponding configuration, please use no port isolation command. Syntax port isolation { [fa-forward-list fa-forward-list ] [gi-forward-list gi-forward-list] } no port isolation Parameter fa-forward-list--Configure Fast Ethernet ports to the forward port list. gi-forward-list -- Configure Gigabit Ethernet ports to the forward port list. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Set port 1, 2, and 4 to the forward port list of port 5: T1500-28PCT(config)# interface fastEthernet 1/0/5 T1500-28PCT(config-if)# port isolation fa-forward-list 1/0/1-2,1/0/4 Set all Ethernet ports to forward port list of port 2, namely restore to the default setting: T1500-28PCT(config)# interface fastEthernet 1/0/2 T1500-28PCT(config-if)# no port isolation show port isolation interface Description The show port isolation interface command is used to display the forward port list of a port. 104