TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 197
lldp med-tlv-select, T1500-28PCTconfig-if# no lldp med-tlv-select
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Status will be changed to Tx&Rx. To disable the LLDP-MED feature for the corresponding port, please use no lldp med-status command. Syntax lldp med-status no lldp med-status Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Enable the LLDP-MED feature for port 1/0/2: T1500-28PCT(config)# interface fastEthernet 1/0/2 T1500-28PCT(config-if)# lldp me d-status lldp med-tlv-select Description The lldp med-tlv-select command is used to configure LLDP-MED TLVs to be included in outgoing LLDPDU for the corresponding port. To exclude LLDP-MED TLVs, please use no lldp med-tlv-select command. By default, All TLVs are included in outgoing LLDPDU. Syntax lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } no lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Example Exclude "network policy" and "inventory" TLVs in LLDPDU outgoing from port 1/0/2: T1500-28PCT(config)# interface fastEthernet 1/0/2 T1500-28PCT(config-if)# no lldp me d-tlv-select network-policy inventory-management 186