TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 81
contact-info, ip management-vlan
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Example Configure the system location as SHENZHEN: T1500-28PCT(config)# location SHENSHEN contact-info Description The contact-info command is used to configure the system contact information. To clear the system contact information, please use no contact-info command. Syntax contact-info [ contact_info ] no contact-info Parameter contact_info -- Contact Information. It consists of 32 characters at most. It is "www.tp-link.com" by default. Command Mode Global Configuration Mode Example Configure the system contact information as www.tp-link.com: T1500-28PCT(config)# contact-info www.tp-link.com ip management-vlan Description The ip management-vlan command is used to configure the IP management VLAN, through which you can log on to the switch. Syntax ip management-vlan vlan-id Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. Command Mode Global Configuration Mode 70