TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 83
ip address-alloc bootp, reset, Syntax, Command Mode, Example, Description
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Syntax ip address-alloc dhcp Command Mode Interface Configuration Mode (interface vlan) Example Enable the DHCP Client function when the management VLAN of the switch is VLAN1: T1500-28PCT(config)# interface vlan 1 T1500-28PCT(config-if)# ip address-alloc dhcp ip address-alloc bootp Description The ip address-alloc bootp command is used to enable the BOOTP Protocol. When the BOOTP Protocol is enabled, the switch will obtain IP address from BOOTP Server. This command should be configured in the Interface Configuration Mode of the management VLAN. Syntax ip address-alloc bootp Command Mode Interface Configuration Mode (interface vlan) Example Enable the BOOTP Protocol to obtain IP address from BOOTP Server when the management VLAN of the switch is VLAN1: T1500-28PCT(config)# interface vlan 1 T1500-28PCT(config-if)# ip address-alloc bootp reset Description The reset command is used to reset the switch's software. After resetting, all configuration of the switch will restore to the factory defaults and your current settings will be lost. Syntax re se t 72