TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 51
user max-number
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Syntax user access-control port-based interface { fastEthernet port | gigabitEthernet port | range fastEthernet port-list | range gigabitEthernet port-list } no user access-control Parameter port -- The Ethernet port number. port-list --The list group of Ethernet ports, in the format of 1/0/1-4. You can appoint 5 ports at most. Command Mode Global Configuration Mode Example Configure that only the users connected to ports 2-6 are allowed to login: T1500-28PCT(config)# user access-control port-based interface range fastEthernet 1/0/2-6 user max-number Description The user max-number command is used to configure the number of the users logging on at the same time. To cancel the limit to the numbers of the users logging in, please use no user max-number command. Syntax use r max-number admin-num guest-num no user max-number Parameter admin-num -- The maximum number of the users logging on as Admin, ranging from 1 to 16. The total number of Admin and Guest should be less than 16. guest-num -- The maximum number of the users logging on as Guest, ranging from 0 to 15.The total number of Admin and Guest should be less than 16. Command Mode Global Configuration Mode 40