TP-Link T1500-28PCT TL-SL2428P T1500-28PCT V1 CLI Reference Guide - Page 182
snmp-server traps vlan
View all TP-Link T1500-28PCT TL-SL2428P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
extended MAC address related traps, please use no snmp-server traps mac command. Syntax snmp-se rver traps mac [ new | full | learn-mode-change | max-learned ] no snmp-se rver traps mac [ new | full | learn-mode-change | max-learned ] Parameter new -- Enable new MAC address trap. It is sent when the switch learns new MAC address including dynamic address, static address and filter address. full -- Enable MAC address table trap. It is sent when the MAC address table is full. learn-mode-change -- Enable MAC address learn-mode-change trap. It is sent when MAC address learning mode of the switch changes. max-learned -- Enable MAC address max-learned trap. It is sent when the amount of learned MAC address reaches the limit which is configured in port security module. Command Mode Global Configuration Mode Example Enable all SNMP extended MAC address-related traps for the switch: T1500-28PCT(config)# snmp-server traps mac Enable new MAC address trap only for the switch: T1500-28PCT(config)# snmp-server traps mac new snmp-server traps vlan Description The snmp-server traps vlan command is used to enable SNMP extended VLAN-related traps which include two types: create and delete. To disable this function, please use no snmp-se rver traps v lan command. Syntax snmp-se rver traps v lan [ create | delete ] no snmp-se rver traps v lan [create | delete ] Parameter create -- Enable VLAN-created trap. It is sent when new VLAN is created successfully. 171