Toshiba 24V4260U User Guide - Page 85
Using Audyssey Dynamic Volume, Selec, he op, ical audio ou, Using, he Dolby, al Dynamic Range Con,
View all Toshiba 24V4260U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Using the TV's features 85 Adjusting the audio 3 Press the ( / arrow) buttons to highlight the Audyssey ABX™ field. 4 Press the ( / arrow) buttons to select On. Using Audyssey Dynamic Volume® This feature provides a consistent sound volume between television programs, commercials, and between the loud and soft passages of movies. 1 Press the MENU button. Select Settings, SOUND, Audyssey Premium Television, Dynamic Volume. 2 Press the ( / arrow) buttons to select ON or Off. NOTE ❖ If Dynamic Range Control is set to On, this feature is automatically set to Off. ❖ This feature does not affect the audio signal output from the DIGITAL AUDIO OUT terminal. Selecting the optical audio output format You can select the optical audio output format when you connect a Dolby® Digital decoder or other digital audio systems to the TV's Digital Audio Out terminal. To select the optical audio output format: 1 Press the MENU button to open the Sound menu. 2 Highlight Audio Setup, and then press the OK button. 3 In the Digital Output Format field, select either Dolby Digital or PCM, depending on your device. 4 To save the new settings, highlight Done, and then press the OK button. 5 To reset the settings to the factory defaults, highlight Reset, and then press the OK button. Using the Dolby® Digital Dynamic Range Control feature You can further compress Dolby® Digital dynamic range, allowing you to switch from digital to analog broadcasts at the same dynamic range. To use the Dolby® Digital Dynamic Range Control: 1 Press the MENU button to open the Sound menu.