Toshiba 55SV670U Owner's Manual - English - Page 19

Chapter 2: Connecting your TV Connecting a personal computer (PC) With either the PC IN or HDMI connection, you can watch your computer's display on the TV and hear the sound from the TV's speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. TV upper back panel •Signal names for mini D-sub 15-pin connector Pin Signal No. name 1R 2G 3B 4 NC * 5 NC Pin Signal No. name Pin Signal No. name 6 Ground 11 NC 7 Ground 12 NC 8 Ground 13 H-sync 9 NC 14 V-sync 10 Ground 15 NC *NC=Not connected To connect a PC to the HDMI terminal on the TV: When connecting a PC to the HDMI terminal on the TV, use an adapter cable and analog audio cables. If connecting a PC with an HDMI terminal, use an HDMI cable. Separate analog cables are not necessary (- page 12). TV upper back panel PC audio cable Computer PC audio output PC audio cable Conversion adapter (if necessary) •To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA, and SXGA signal formats. For detailed signal specifications, see page 75. •To display the optimum picture, use the PC settings feature (- "Using the PC settings feature" on page 57). Note: • The PC audio input terminals on the TV are shared with the HDMI 1 analog audio input terminals. • Some PC models cannot be connected to this TV. • An adapter is not needed for computers with a compatible mini D-sub15-pin terminal. • Depending on the DVD's title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes. Computer PC audio output The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 76. Note: • The edges of the images may be hidden. • If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). 19