Toshiba MW20FN1 Owners Manual - Page 24

TV operation TV Operation (continued) CHANNEL / MUTE CHANNEL RETURN SLEEP Sleep Mute To set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be display for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0. SLEEP 120 SLEEP Press MUTE to switch off the sound. The unit's sound will be silenced and "MUTE" will briefly appear on the screen. The sound can be switched back on by pressing this button again or one of VOLUME L or M. MUTE MUTE Channel / Note: To listen through the headphone, insert a headphone (not supplied) with a 1/8" mini plug into HEADPHONE jack on the front. The sound from the TV speaker is muted. Press and release CHANNEL or . The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See page 26 "Setting channels automatically". CHANNEL CH 012 Channel return This button allows you to go back to the last channel selected by pressing CHANNEL RETURN. Press this button again to return to the last channel you were watching. CHANNEL RETURN CH 012 SKIP 24