Toshiba MW20FN1 Owners Manual - Page 47

Duplicating a video tape If you connect the unit to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. TV/VCR 3 3 2 1 Duplicating a video tape Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. Connection with second video recorder • Select "LINE1" on step 2. Playback VCR 1 Press SP/SLP to select the desired tape speed SP or SLP. SP/SLP RETURN It is recommended that you set the Speed to the SP mode on the recording VCR for best results. 2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position. "LINE1" or "LINE2" will appear on the INPUT screen. SELECT LINE1 ZOOM LINE1: on the rear panel LINE2: on the front panel 3 Press both REC at the same time, then press PAUSE/STILL. REC PAUSE/STILL To VIDEO OUT Audio/Video cable (not supplied) Recording VCR To AUDIO (R) OUT To AUDIO (L) OUT VHF/UHF OUT PUT VIDEO DIGITAL AUDIO COAXIAL L AUDIO R LINE 1 IN VIDEO L(MONO) AUDIO R Connection with Camcorder • Select "LINE2" on step 2. Playback Camcorder Recording VCR To VIDEO IN To AUDIO (L) IN To AUDIO (R) IN To AV Jack Other functions (VCR) 4 Press PLAY on the playback VCR, then press PAUSE/STILL. 5 Release the recording pause and the playback. Note: Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws. AUDIO PHONES VIDEO L/MONO R REW STOP/EJECT PLAY FF REC/OTR CHANNEL LINE IN 2 POWER REC/OTR TIMER REC OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP POWER Illustration of MW20FN1/R To AUDIO (R) IN To AUDIO (L) IN To VIDEO IN Audio/Video cable (not supplied) For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. 47