Toshiba MW20FN1 Owners Manual - Page 46
Second Audio Program/Stereo Recording and Playback, Stereo recording and playback
View all Toshiba MW20FN1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Other functions (VCR) Second Audio Program (SAP)/ Stereo recording and playback AUDIO SELECT 1-2 1-2 1-2 Second Audio Program (SAP) Stereo recording and playback Your unit is fitted with a SAP broadcast system which enables you to switch to a Second Audio Program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. 1 Press MENU. Press or to select "TV SETUP", then press ENTER. MENU SETUP ENTER M E N U TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP 〈 / /ENTER/MENU〉 2 Press or to select "SAP". Then press ENTER to select "ON". Then press MENU repeatedly until the menu screen is cleared. ENTER MENU SETUP TV SETUP V-CHIP SET ON/OFF TIMER PICTURE AUDIO SURROUND ON OFF STABLE SOUND ON OFF SAP ON OFF 〈 / /ENTER/MENU〉 Listening to SAP When the unit is turned on or a channel selection is made, make certain the letters "SAP" appears on the screen. This means that the "Second Audio Program" broadcasting is available. STEREO SAP SAP OR When a MTS STEREO broadcast is received, "STEREO" will appear on the screen and the program STEREO can be viewed or recorded in stereo. The Hi-Fi stereo recording procedure is the same as for normal recordings. Note: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case "STEREO" will not appear and the sound will be in mono. AUDIO SELECT Output selection When viewing an MTS stereo TV program, or playing a prerecorded VHS Hi-Fi stereo videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi stereo position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SOUND HEARD ON BOTH SELECTION SPEAKERS STEREO L ch R ch MONO STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO Notes: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. • When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural. 46