Toshiba MW20FN1 Owners Manual - Page 36

Playback (VCR) Cassette tape playback To play a prerecorded tape. Playback AUDIO PHONES VIDEO L/MONO R REW STOP/EJECT PLAY FF REC/OTR CHANNEL LINE IN 2 POWER REC/OTR TIMER REC OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP POWER REW FF Illustration of MW20FN1/R PLAY STOP/EJECT Rewind or forward the tape REV PLAY FWD STOP 1 Load a prerecorded tape: (When loading a cassette tape without the erase prevention tab, playback will start automatically). 2 To start playback: Press PLAY on the front panel or on the remote. Playback will start. " " will appear on the screen for about 4 seconds. PLAY PLAY To stop playback: Press STOP/EJECT once on the front panel or press STOP on the remote. The tape will stop but remain fully loaded and ready to play. " " will appear on the screen for about 4 seconds. STOP/EJECT STOP Preparation: • Press TV/VCR to select the TV/VCR mode. Stop the playback or recording with STOP. To rewind the tape: Press REW on the front panel or press REV on the remote. REW REV To forward the tape: Press FF on the front panel or press FWD on the remote. FF FWD To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY. Forward/Reverse picture search mode When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REV or FWD again and hold it down. The unit will resume the tape winding as soon as the button is released. Notes: • If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button. • This unit selects the playback tape speed SP or SLP auto- matically. • When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the resuming playback mode automatically. 36