Uniden UM525 English Owners Manual - Page 37

4. If the base ID you set appears correctly, rotate PUSH/SELECT to select YES. The radio saves the base ID you input. Otherwise, rotate PUSH/SELECT to select NO. 5. Turn the radio off then turn it back on to enable the base ID you set. Setting a WHAM Link Channel The link channel between the radio and the WHAM microphone you are installing must be the same. You can select 20 link channels. 1. Rotate PUSH/SELECT to select LINK CH, then press PUSH/SELECT to select it. LINK CH and a channel number appear. 2. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or counterclockwise to move backward. When the number you want appears, press PUSH/ SELECT to select it. A confirmation screen appears. 3. If the channel number you set appears correctly, rotate PUSH/SELECT to select YES. The radio saves the channel number you input. Otherwise, rotate PUSH/SELECT to select NO. 4. Turn the radio off then turn it back on to enable the base ID you set. Setting a WHAM x 4 Base ID The base ID between the radio and the WHAM x 4 microphone you are installing must be the same. 1. Rotate PUSH/SELECT to select BASE ID, then press PUSH/SELECT to select it. BASE ID and a channel number appear. 2. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or counterclockwise to move backward. When the number you want appears, press PUSH/ SELECT to select it. A confirmation screen appears. 3. If the base ID you set appears correctly, rotate PUSH/SELECT to select YES. The radio saves the base ID you input. Otherwise, rotate PUSH/SELECT to select NO. Setting the WHAM Sub Radio Mode You can set up the radio so connected WHAM and WHAM x 4 microphones can communicate with each other. 1. Rotate PUSH/SELECT to select SUB RADIO, then press PUSH/SELECT to select it. SUB RADIO and ON and OFF appear. 2. To turn on the sub radio mode, rotate PUSH/SELECT to select ON, then press PUSH/ SELECT to confirm it. The sub radio mode is turned on. Otherwise, to turn off the sub radio mode, rotate PUSH/SELECT to select OFF, then press PUSH/SELECT to confirm it. Setting the WHAM x 4 Antenna You can select the antenna you want to use with the WHAM x 4 microphone. 1. Rotate PUSH/SELECT to select ANTENNA SEL, then press PUSH/SELECT to select it. 2. To select the internal WHAM x 4 antenna, rotate PUSH/SELECT to select INTERNAL, then press PUSH/SELECT to confirm it. Otherwise, to select the external antenna, rotate PUSH/SELECT to select EXTERNAL, then press PUSH/SELECT to confirm it. Using the Radio's Menus 37