ViewSonic PJD7583wi PJD7383, PJD7383I, PJD7583W, PJD7583WI User Guide (English - Page 24
Signal, Parameter
UPC - 766907511123
View all ViewSonic PJD7583wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ensure a quality use of the wireless microphone, it is recommended that your microphone conforms to the specifications listed in the table below. Signal Parameter Min Type Max Transducer Principle Microphone Impedance 300 Frequency response 600 Dynamic 1K ohm 16k Hz • There are two ways to adjust microphone volumes. • Directly set microphone volume levels in the SYSTEM SETUP: Advanced > Audio Settings > Microphone Volume menu. • Set projector volume levels in the SYSTEM SETUP: Advanced > Audio Settings > Volume menu, or press Volume keys (+, -) on the remote control. (The projector volume setting will affect the microphone volume.) • To make the microphone input available when the projector is in standby mode, turn on the SYSTEM SETUP: Basic > Standby Settings > Microphone menu. • If the microphone is not working, check the volume setting and cable connection. • You might get feedback noise from the microphone when you are too close to the speaker of the projector. Move the microphone away from the speaker of the projector. The greater volume you require, the greater distance you need to be away from the speaker to prevent the noise. 20 Connection