ViewSonic PJD7583wi PJD7383, PJD7383I, PJD7583W, PJD7583WI User Guide (English - Page 61
Using the projector in standby mode
UPC - 766907511123
View all ViewSonic PJD7583wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under SYSTEM SETUP: Basic > Standby Settings, and the cable connections are correctly made. For the connection methods, see the Connection chapter. LAN Control Select On when you wish to control the projector over a network when it is in standby mode. Microphone Select On when you wish to use a microphone in standby mode. Be sure you have adjusted the SYSTEM SETUP: Advanced > Audio Settings > Microphone Volume menu to a desired level before the projector is turned off. Active VGA Out Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN 1. Active Audio Out Selecting On outputs an audio signal when the AUDIO IN 1 and AUDIO OUT sockets are correctly connected to devices. The projector outputs the audio signal received only from AUDIO IN 1. Operation 57