ViewSonic PJD7583wi PJD7383, PJD7383I, PJD7583W, PJD7583WI User Guide (English - Page 76
Tighten the screw that secures the lamp.
UPC - 766907511123
View all ViewSonic PJD7583wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
7. Lift the handle so that it stands up. Use the handle to slowly pull the lamp out of the projector. CAUTION • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. Insert the new lamp into the lamp compartment and make sure it fits in the projector. 9. Reconnect the lamp connector and place it back into its slot to be flush with the projector. 10. Tighten the screw that secures the lamp. CAUTION • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Ensure the handle is fully laid flat and locked in place. 12. Place the lamp protection film supplied with the new lamp on the lamp compartment. 13. Replace the lamp cover on the projector. 2 2 1 72 Maintenance