ViewSonic PJD7583wi PJD7383, PJD7383I, PJD7583W, PJD7583WI User Guide (English - Page 69
Language, Projector, Position, Auto Power, Blank Timer, Panel Key, Splash, Screen, Capture, Message
UPC - 766907511123
View all ViewSonic PJD7583wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4. SYSTEM SETUP: Basic menu Function Language Projector Position Auto Power Off Blank Timer Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 23 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12 for details. Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 69 for details. Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 35 for details. Panel Key Lock Splash Screen Disables or enables all panel key functions except II POWER on the projector and keys on the remote control. See "Locking control keys" on page 35 for details. Allows you to select which logo screen will be displayed during projector start-up. Screen Capture Captures and stores the projected picture as Screen Capture. See "Creating your own startup screen" on page 37 for details. Message LAN Control Settings Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. See "Controlling the projector through a LAN environment" on page 39 for details. Standby Settings See "Using the projector in standby mode" on page 57 for details. High Altitude A mode for operation in high altitude areas. See "Operating in a Mode high altitude environment" on page 36 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC source is in use. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. SYSTEM SETUP: Advanced menu Operation 65