Whirlpool MH2175XSB Service Guide - Page 26

Removing The Oven Cavity Lamp And Charcoal Filter

Page 26 highlights

Removing the Oven Cavity Lamp and Charcoal Filter To remove the charcoal filter: 1. Unplug microwave oven or disconnect power. 2. Remove the air grille (see page 4-4). 3. Lift the charcoal filter from the mounting frame and pull it out of the microwave unit. IMPORTANT: When you work on the microwave oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 4. Replace the charcoal filter with the correct replacement filter. Charcoal filter 1. Unplug microwave oven or disconnect power. 2. Remove the air grille (see page 4-4). 3. To change the oven cavity lamp, lift the tab on the cover to access the lamp. Lift tab to access lamp 4. Unscrew the lamp from the socket. There will be a dab of silicone that is intended to keep the bulb from loosening in the socket during shipping. Be sure to clean off any loose silicone from the socket before installing a new lamp. 4-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

4-8
REMOVING THE OVEN CAVITY LAMP AND CHARCOAL FILTER
IMPORTANT:
When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Unplug microwave oven or disconnect power.
2. Remove the air grille (see page 4-4).
3. To change the oven cavity lamp, lift the tab on
the cover to access the lamp.
L±ft tab to access lamp
To remove the charcoal filter:
1. Unplug microwave oven or disconnect power.
2. Remove the air grille (see page 4-4).
3. Lift the charcoal filter from the mounting frame
and pull it out of the microwave unit.
4. Replace the charcoal filter with the correct
replacement filter.
4. Unscrew the lamp from the socket.
There will
be a dab of silicone that is intended to keep
the bulb from loosening in the socket during
shipping.
Be sure to clean off any loose sili-
cone from the socket before installing a new
lamp.
Charcoal filter