Whirlpool MH2175XSB Service Guide - Page 31
Removing The High-voltage Transformer
View all Whirlpool MH2175XSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Removing the High-Voltage Transformer 5. Remove the 2 wire connectors on the front, 1 wire connector from the magnetron and 2 wire connectors from the capacitor. 2 Wire Connectors 1 Wire Connector IMPORTANT: When you work on the microwave oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Unplug microwave oven or disconnect power. 2. Remove the outer cabinet (see page 4-10). 3. CAUTION: Discharge the high-voltage capacitor with a 20,000 Ohm resistor to chassis ground. 4. Remove the 4 screws from below the transformer that secure it to the microwave unit. 2 Wire Connectors 4-13
4-13
REMOVING THE HIGH-VOLTAGE TRANSFORMER
IMPORTANT:
When you work on the microwave
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Unplug microwave oven or disconnect power.
2. Remove the outer cabinet (see page 4-10).
3. CAUTION:
Discharge the high-voltage ca-
pacitor with a 20,000 Ohm resistor to chassis
ground.
4. Remove the 4 screws from below the trans-
former that secure it to the microwave unit.
5. Remove the 2 wire connectors on the front, 1
wire connector from the magnetron and 2 wire
connectors from the capacitor.
1 W±re
Connector
2 W±re
Connectors
2 W±re
Connectors