Whirlpool MH2175XSB Service Guide - Page 34
Removing The Ac Line Filter
View all Whirlpool MH2175XSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Removing the AC Line Filter 6. When reinstalling the wire connectors to the AC line filter, install the following wires to the following connection spades: 1. Black AC line in 2. White AC line in 3. Black IMPORTANT: When you work on the microwave oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 4. Blue Green Ground 1. Unplug microwave oven or disconnect power. 2. Remove the outer cabinet (see page 4-10). 3 1 3. CAUTION: Discharge the high-voltage capacitor with a 20,000 Ohm resistor to chassis ground. 4. Remove 3 screws that secure the AC line filter to the unit. Slide the AC line filter and bracket out from under the tab to remove it. Ground 2 4 5. Disconnect the 5 wire connectors from the AC line filter. AC Line Filter 4-16