Whirlpool MH2175XSB Service Guide - Page 32
Removing The High-voltage Diode And Capacitor
View all Whirlpool MH2175XSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Removing the High-Voltage Diode and Capacitor To remove the High-Voltage Capacitor: 1. Unplug microwave oven or disconnect power. 2. Remove the outer cabinet (see page 4-10). 3. CAUTION: Discharge the high-voltage capacitor with a 20,000 Ohm resistor to chassis ground. IMPORTANT: When you work on the microwave oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Unplug microwave oven or disconnect power. 4. Remove one screw and slide the tab out from the slot in the unit. 5. Disconnect the wire connectors and remove the capacitor from the unit. 2. Remove the outer cabinet (see page 4-10). 3. CAUTION: Discharge the high-voltage capacitor with a 20,000 Ohm resistor to chassis ground. 4. Remove one screw to remove the diode. Disconnect one wire connector from the capacitor. Tab Screw High Voltage Diode Screw 4-14