Whirlpool MH2175XSB Service Guide - Page 36
Removing The Fuse Holder & Mounting Bracket
View all Whirlpool MH2175XSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Removing the Fuse Holder & Mounting Bracket 4. Remove the control panel (see page 4-4, steps 2 - 5). 5. Remove the wires from the retainer on the top of the fuse holder mounting bracket. 6. Remove the 2 wire connectors from the fuse holder. IMPORTANT: When you work on the microwave oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Unplug microwave oven or disconnect power. 7. Pull the assembly out of the microwave unit. 8. Remove the fuse from the holder. 9. Remove 1 screw in the bottom of the fuse holder to remove the holder (not shown in photo. Only visible when fuse is removed). 2. Remove the bottom cover (see page 4-2, steps 1-3). 3. Remove the 2 screws near the front right corner of the bottom of the unit. Wire Retainer Fuse holder Mounting bracket 4-18 2 Wire connectors