Xerox 3450B Service Manual - Page 106
Top Cover Assembly (PL 9.2.1
UPC - 095205120011
View all Xerox 3450B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Top Cover Assembly (PL 9.2.1) 1. Remove the Print Cartridge (page 8-4) and protect it from light. 2. Remove the Right Cover Assembly (page 8-7) and the Left Cover Assembly (page 8-8) from the printer. 3. Open Tray 1, the rear cover, and the front section of the Top Cover. Note If the NIC Card is installed, remove it ( page 8-17) to access the connectors on the Main Board. 4. Disconnect CN 4 (Front Panel) from the Main Board and CN 2 (Cover Open) from the Cover Interconnect Board. 5. Remove 3 screws (2 at the top front and 1 on the rear edge) that secure the Top Cover to the printer assembly. Service Parts Disassembly CN 4 CN 20 s3450-034 8-9
Service Parts Disassembly
8-9
Top Cover Assembly (PL 9.2.1)
1.
Remove the Print Cartridge (page 8-4) and protect it from light.
2.
Remove the Right Cover Assembly (page 8-7) and the Left Cover Assembly
(page 8-8) from the printer.
3.
Open Tray 1, the rear cover, and the front section of the Top Cover.
Note
If the NIC Card is installed, remove it ( page 8-17) to access the connectors
on the Main Board.
4.
Disconnect CN 4 (Front Panel) from the Main Board and CN 2 (Cover Open)
from the Cover Interconnect Board.
5.
Remove 3 screws (2 at the top front and 1 on the rear edge) that secure the Top
Cover to the printer assembly.
CN 4
CN 20
s3450-034