Xerox 3450B Service Manual - Page 78

Jam At Exit (Jam 2) Paper jams in the Fuser Assembly outlet or the Exit Roller Assembly. Troubleshooting References Applicable Parts Exit Sensor Actuator Fuser Assembly Exit Transport Assembly Main Board Procedure Wiring and Plug/Jack Map References Step 1 2 3 4 5 Action and Questions Yes No Is the Exit Sensor Actuator damaged or binding? Repair or replace the actuator and/or sensor. Go to Step 2. Inspect the Exit Roller Assembly. Is it damaged or binding? Replace the Exit Go to Step 3. Roller Assembly. Inspect the Fuser. Is any paper wrapped around the Fuser rollers? Remove obstruction and clean Fuser rollers. Go to Step 4. Is the Fuser Assembly operational (rotates when Go to Step 5. the Fuser motor is on)? Replace the Fuser Assembly. Use the embedded diagnostics to check the Fuser Exit Sensor. Is the sensor operational? Replace Main Board. Replace Fuser Exit Sensor. General Troubleshooting 4-11