Xerox 6180N Common Controller System Guide v 3.7 - Page 14
IPP Gateway Configuration, cd /opt/XRXnps/XRXipp, gwConfig, Gateway, Value data, IPPServlet.IppPrinter
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Gateway Configuration System Guide 8. When complete, close the Terminal window and select System, Restart on the DocuSP user interface. IPP Gateway Configuration Perform the following to configure the IPP Gateway. 1. On the DocuSP Controller, open a new terminal window and login as root 2. Type csh and press . 3. Type cd /opt/XRXnps/XRXipp 4. Display a list of the directory contents by typing ls. The file gwConfig should be displayed. 5. Type ./gwConfig and press . 6. The gateways that may be configured are: SNMP Gateway, Internet Services, and IPP Gateway. If necessary, make the terminal window large enough to display the list while configuring each value desired. The only value necessary for the IPP and Internet Services Gateways is the Printer URI value. 7. Answer the following questions with the information supplied as follows: • Enter the name of the gateway to be configured: IPP Gateway • Configure the IPP Gateway? [Y/N] y • Enter name: Value data • Printer URL: http://something.com:631/servlet/ IPPServlet.IppPrinter NOTE: The text "something.com" is the server name and domain name of the DocuSP controller on which you are configuring the gateway. For example, server name.domain name. If no domain name is used, enter the IP address of the controller without the .com. For example, http:// 52.126.255.255:631/servlet/IPPServlet.IppPrinter. 8. Continue with the above process for every value to be configured. 9. When all of the desired values have been configured, press 2-2 Common Controller