Xerox 6280N User Guide - Page 109
Reset the paper guides in Tray 2, Tray 3, or Tray 1 MPT. See, About Paper, Loading Paper in, Trays 2-3 - color laser printer
UPC - 095205747430
View all Xerox 6280N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Print-Quality Problems Symptom Reason/Action Partial blanks, creased The paper is damp. paper, or blotted printing Replace the paper. The paper is outside the recommended specification range. Replace the paper with a recommended size and type. See About Paper on page 48. The transfer unit, or fuser, is not installed correctly. Reinstall the transfer unit and/or fuser. The print cartridges are not Xerox print cartridges. Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if necessary. Condensation inside the printer causes partial blanks or creased paper. Turn the printer on, and leave it on, for at least one hour to get rid of the condensation. If the problems still occurs, see the Xerox Support website, www.xerox.com/office/6280support, for assistance. Vertical blanks The laser is being blocked. Remove the print cartridges and clean all debris from the laser len(s) with a lint free cloth. The transfer unit, or fuser, is old or damaged. Check the condition of the transfer unit and fuser, and replace as necessary. The print cartridges are not Xerox print cartridges. • Check the condition of the print cartridge, and replace as necessary. Verify that the print cartridges (C/M/Y/K) meet specifications, and replace if necessary. Slanted printing The paper guides in Tray 2, Tray 3, or Tray 1 (MPT) are not set correctly. Reset the paper guides in Tray 2, Tray 3, or Tray 1 (MPT). See Loading Paper in Trays 2-3 on page 55. Horizontal bands, approximately 22 mm wide, appear vertically every 73 mm The print cartridge has been exposed to too much light; possibly from leaving the front door open too long. Replace the print cartridge. Colors are blurry or there is white area around objects Color to color alignment is not correct Use the automatic color registration. See Color Registration on page 111. Phaser® 6280 Printer 110