Xerox 6280N User Guide - Page 96
Network Setup, Description of Menu Items, Phaser® 6280 Printer - phaser network card
UPC - 095205747430
View all Xerox 6280N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Description of Menu Items Network Setup Specifies printer settings affecting jobs sent to the printer through a network port. • The settings in the Network Setup menu cannot be set when entering this menu during printing. • You need to restart the printer to activate the new settings. After making the settings, turn off the printer and then turn it on again. Item Ethernet TCP/IP Protocol Host Access List Reset Defaults Adobe Protocol Description Specifies the communication speed and the modes of Ethernet. • Auto (default) Automatically changes between 10M Half Duplex, 10M Full Duplex, 100M Half Duplex, and 100M Full Duplex. • 10M Base Half • 10M Base Full • 100M Base Half • 100M Base Full Specifies the settings to use the TCP/IP protocol. Set Enable when using the protocol. When Disable is selected, the protocol cannot be activated. • LPR (default: Enable) • Port 9100 (default: Enable) • IPP (default: Enable) • SMB TCP/IP • SMB NetBEUI • FTP (default: Enable) • WSD (default: Enable) • SNMP (default: Enable) • Email Alerts (default: Enable) • CentreWare IS (default: Enable) • Bonjour (mDNS) (default: Enable) IPP is displayed only when the optional multi protocol card is installed. Specifies blocking the reception of data from certain IP addresses. Initializes network data stored in NVM. The NVM is a nonvolatile memory that stores the printer settings even after power off. Initializing the NVM will revert the value for each item of the Wired Network menu to default. Specifies the PostScript communication protocol: Standard, BCP, TBCP, Binary, or Auto. Phaser® 6280 Printer 97