Yamaha HTR-5935 Owners Manual - Page 33

BASIC OPERATION PLAYBACK 5 Rotate VOLUME on the front panel (or press VOLUME +/- on the remote control) to adjust the volume to the desired output level. VOLUME + or VOLUME - 7 Press PROGRAM l / h buttons on the front panel (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display. See page 60 for details about sound field programs. Front panel Remote control 6 Press TONE CONTROL on the front panel repeatedly to select "TREBLE" or "BASS" and then press BASS/TREBLE +/- buttons to adjust the corresponding frequency response level. TONE CONTROL BASS/TREBLE l PROGRAM h Front panel or STEREO 1 MUSIC ENTERTAIN MOVIE 2 3 4 STANDARD 5 SELECT 6 EXTD SUR. 7 DIRECT ST. 8 SPEAKERS 9 ENHANCER 0 NIGHT STRAIGHT 10 ENT. Remote control DVR V-AUX DTV/CBL pDVD SP A TREBLE MD/CD-R TUNER CD XM VOLUME dB 0dB L R • Select "TREBLE" to adjust the high-frequency response. • Select "BASS" to adjust the low-frequency response. Notes • Speaker and headphone adjustments are stored independently. • When "TC.BYPASS" is set to "AUTO" (see page 77), and "BASS" and "TREBLE" are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit. • If you increase or decrease the high-frequency or lowfrequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. • TONE CONTROL is not effective when the "DIRECT STEREO" mode (see page 36) is selected or when "MULTI CH INPUT" (see page 35) is selected as the input source. • To enjoy 6.1-channel compatible sources in surround, see page 38 for details. DVR V-AUX DTV/CBL pDVD MD/CD-R TUNER CD XM VOLUME SP A dB q PL Sci-Fi L R Currently selected sound field program Notes • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 35). • Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs are applied. • To display information about the currently selected input source in the front panel display, see page 36 for details. 29