Yamaha SP2060 SP2060 V1.2 Owners Manual - Page 29
LIBRARY, Displaying the current library, Recalling a library
View all Yamaha SP2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Foreword Introduction to the SP2060 The Controls and Connectors Panel Operation NOTE • The type names are abbreviated on the SP2060 screen. For example, "24dB/Oct Bessel" is displayed as "24Bessel." • Gc page is displayed if you select "Adjust Gc" for the Type parameter. • Thru No filter is applied. The original characteristics are kept with no attenuation for all frequency ranges. • AdjustGc (Adjustable Gc) Filters with an Adjustable Gc enable you to adjust the gain at the cutoff frequency in the range of -6dB through +6dB. With Gc set to -3dB, the filter is practically a Butterworth filter. And with Gc set to -6dB, the filter is practically a Linkwitz-Riley filter. • Butrwrth (Butterworth) This filter is the most common type of filter. It has a flat pass band and a -3dB gain at the cutoff frequency. • Bessel This filter focuses on the phase characteristics. Although it has a more gradual roll-off than a Butterworth filter, it will pass a square wave without causing ringing. • Linkwitz (Linkwitz-Riley) This filter features the square of the second order. When the output signal from its LPF and HPF are combined, the gain over the entire range is +/-0dB. It has a flat pass band and a -6dB gain at the cutoff frequency. LIBRARY Using libraries facilitates the recall of optimal speaker settings. Up to 60 libraries are available for each component via the DME Designer application. Displaying the current library Pressing the [X-OVER] key repeatedly will select the Current Library display, Library List display, or X-Over display, in this order. The title of the library most recently recalled for each component will be displayed. CURRENT LIBRARY IF2112/95 NOTE Libraries cannot be displayed or recalled for Input channels. If you press an Input channel [SEL] key, a message appears. Recalling a library Follow the steps below to recall a library: 1. Press the [X-OVER] key repeatedly until the Library List display appears on the screen. LIBRARY LIST IF2112/64 2. Press the [SEL] key of an Output channel for a component for which you wish to recall a library. 3. Press the [▲INC]/[▼DEC] keys to select a library. LIBRARY LIST IF2112/64 4. Press the [NEXT/RECALL] key. A confirmation message will appear. LIBRARY RECALL ARE YOU SURE? Panel Operation Network Settings References SP2060 Owner's Manual 29