Yamaha SP2060 SP2060 V1.2 Owners Manual - Page 31

Foreword Introduction to the SP2060 The Controls and Connectors Panel Operation Scenes are stored in the preset area and user area. Preset area There is a preset scene for each of 12 configurations. These scenes are numbered 1 through 12. Each scene title has the same name as the corresponding configuration title. No.1. [3x2way ] No.2. [3x2way L ] No.3. [2x(2way+Sub) ] No.4. [2x(2way+Sub)L ] No.5. [2x2way+2xAux ] No.6. [2x2way+2xAux L ] No.7. [2x3way ] No.8. [2x3way L ] No.9. [4way+2xAux ] No.10. [5way+Aux ] No.11. [6way ] No.12. [Multi Zone ] User area The user area can accommodate up to 87 user scenes, which you can store and recall at your discretion. These scenes are numbered 13 through 99. Scene indication Scene number Scene property Title 25:FOH(Event A) [2x(2way+SUB)L] Configuration title The upper row indicates a scene number, property, and title. The bottom row indicates the configuration title. Scene property includes the following types: Preset scene Protected user scene Unprotected user scene NOTE After you recall a scene, if you edit a parameter, an icon appears in the lower right corner on the screen. Recalling a scene Follow the steps below to recall a scene (1-99): HINT You can also recall a scene using the DME Designer application. NOTE If recalling a scene has changed the configuration, audio output will be muted momentarily. 1. Press the [SCENE] key to select the Scene Selection display. 25:FOH(Event A) [2x(2way+SUB)L] 2. Press the [▲INC]/[▼DEC] keys to select a scene number. While you are selecting a scene, the scene number and title will be flashing. NOTE If no data is included in the currently-selected scene, the message "No Scene" appears. 3. Press the [RECALL] key. A confirmation message will appear. 33:RECALL ARE YOU SURE? 4. Press the [YES] key. The scene is recalled and its number becomes the current scene number. To cancel the recall operation, press the [NO] key, instead of the [YES] key. The unit returns to the Scene Selection display. NOTE If the selected scene contains no data or User Lock is turned on for the scene, a status message appears. Panel Operation Network Settings References SP2060 Owner's Manual 31