Yamaha SP2060 SP2060 V1.2 Owners Manual - Page 48

Foreword References General Specifications Sampling Frequency Signal Delay Indicators Miscellaneous External Internal Power Consumption Dimensions (HxDxW) Net Weight Temperature Range Included Accessories Normal Rate: 44.1, 48 kHz (±0.1%) Double Rate: 88.2, 96 kHz (±0.1%) 96 kHz Less than 761 µ sec (INPUT to OUTPUT @Fs=96kHz) Key indicators x 9 MUTE indicators (INPUT A/B, OUTPUT 1-6) 6-segment LED level meters (INPUT A/B, OUTPUT 1-6) 30 W 44 x 361 x 480 mm 4.2 kg Operating: 5 to 40 ˚C Storage: -20 to 60 ˚C AC power cord, Rubber feet x 4, Owner's manual Introduction to the SP2060 The Controls and Connectors Panel Operation Network Settings Electrical Characteristics Output impedance of signal generator: 150 Ω Frequency Response Input INPUT A, B Output RL Conditions MIN TYP MAX Units OUTPUT 1-6 600 Ω Fs=96kHz@20Hz-40kHz, reference to the nominal output level @1kHz -1.0 0.0 +0.5 dB Total Harmonic Distortion Input Output RL Conditions MIN INPUT A, B OUTPUT 1-6 600 Ω Fs=96kHz, +4dBu@20Hz-40kHz Fs=96kHz, +22dBu@1kHz DIGITAL INPUT AES/EBU OUTPUT 1-6 600 Ω Fs=48kHz@1kHz, Input level: -1dBFS * Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz. TYP MAX 0.05 0.007 0.015 Units % % % Hum & Noise Input INPUT A, B DIGITAL INPUT AES/EBU Output OUTPUT 1-6 RL 600 Ω Conditions Fs=96kHz, Rs=150 Ω MIN TYP MAX Units -82 -79 dBu OUTPUT 1-6 600 Ω Fs=48kHz, Input level: -∞dBFS -86 dBu *Hum & Noise are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation. Dynamic Range Input INPUT A, B DIGITAL INPUT AES/EBU Output OUTPUT 1-6 RL 600 Ω Conditions Fs=96kHz MIN TYP MAX Units 106 dB OUTPUT 1-6 600 Ω Fs=48kHz 110 dB *Dynamic range is measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation. 48 SP2060 Owner's Manual References