Yamaha SP2060 SP2060 V1.2 Owners Manual - Page 34
User Lock, INPUT A/B LINK, ARE YOU SURE?, Panel Locked
View all Yamaha SP2060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Foreword Introduction to the SP2060 The Controls and Connectors Panel Operation 6. To confirm the operation, press the [YES] key. The flashing "ON" (or "OFF") lights up steadily, and the cursor returns to the "ON (or OFF)" position. INPUT A/B LINK ARE YOU SURE? To cancel the operation and return to the original setting, press the [NO] key. NOTE If you set INPUT A/B LINK to "ON," the linked parameters for channel A will be copied to channel B parameters. User Lock Parameter settings can be "locked" temporarily to prevent accidental mis-operation. This function is useful to avoid unintentional operations or to prevent others from operating the panel controls. You can specify a password for User Lock. The following operations are the User Lock target. * Editing the parameters * Recalling and storing a scene * Changing a scene title * Changing the scene protection status * Recalling a library NOTE • You can mute or unmute, or cancel User Lock even if the User Lock function is turned on. • The User Lock function is effective only for the panel controls on the SP2060, and does not affect any control signals from external devices. 1. Press the [UTILITY] key to select the Utility display. The most recently used Utility display will appear. 2. Press the [UTILITY], [NEXT] or [BACK] key repeatedly until the User Lock page appears. USER LOCK OFF USER LOCK ON 4. Press the [NEXT] key to move the cursor to the icon. USER LOCK ON 5. Press the [YES] key. A confirmation message will appear. USER LOCK ARE YOU SURE? 6. To confirm the operation, press the [YES] key. A status message appears, and User Lock becomes active. Panel Locked HINT • A short cut to turn on the User Lock function is to hold down the [MUTE] key for two seconds or longer. • A short cut to turn off the User Lock function is to hold down the [MUTE] key for two seconds or longer. 3. Press the [▲INC] key to turn User Lock on. To cancel User Lock, press the [▼DEC] key. "ON" flashes on the screen. NOTE If you have specified a password, a password input display will appear (page 35). Panel Operation Network Settings References 34 SP2060 Owner's Manual