Zenith P50W26B Operating Guide - Page 13

Turning on the Monitor - When using the remote control, aim it at its sensor on the Monitor. Turning on the Monitor just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT button on the remote control and then the Monitor will switch on. Turning on the Monitor (power cord is still connected) 1. If the Monitor was turned off with the ON/OFF button on the Monitor • Press the ON/OFF button on the Monitor to turn the Monitor on. 2. If the Monitor was turned off with the remote control or the ON/OFF button on the Monitor • Press the ON/OFF button on the Monitor and then press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT button on the remote control to turn the Monitor on. Menu Language Selection - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select LANGUAGE. 3. Press the G button and then use D / E button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice. 4. Press the MENU button. VIDEO LANGUAGE G AUDIO TIME KEY LOCK ORBITER WHITE WASH SET ID SPECIAL ENGLISH ESPAÑOL PORTUGUÊS FRANÇAIS SCREEN TWIN MENU PREV. 13