ZyXEL SBG3300-NB00 User Guide - Page 204
Network Setting > Routing > RIP
View all ZyXEL SBG3300-NB00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Chapter 9 Routing Click Network Setting > Routing > RIP to open the RIP screen. Figure 64 RIP The following table describes the labels in this screen. Table 42 Network Setting > Routing > RIP LABEL Interface Version Operation DESCRIPTION This is the name of the interface in which the RIP setting is used. The RIP version controls the format and the broadcasting method of the RIP packets that the Device sends (it recognizes both formats when receiving). RIP version 1 is universally supported but RIP version 2 carries more information. RIP version 1 is probably adequate for most networks, unless you have an unusual network topology. Select Passive to have the Device update the routing table based on the RIP packets received from neighbors but not advertise its route information to other routers in this interface. Enabled Apply Cancel Select Active to have the Device advertise its route information and also listen for routing updates from neighboring routers. Select the check box to activate the settings. Click Apply to save your changes. Click Cancel to exit this screen without saving. 204 SBG3300-N Series User's Guide