ZyXEL SBG3300-NB00 User Guide - Page 332

Chapter 31 TR-069 Client The following table describes the fields in this screen. Table 117 Maintenance > TR-069 Client LABEL DESCRIPTION Inform Select Enable for the Device to send periodic inform via TR-069 on the WAN. Otherwise, select Disable. Inform Interval Enter the time interval (in seconds) at which the Device sends information to the autoconfiguration server. ACS URL Enter the URL or IP address of the auto-configuration server. ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server. ACS Password Enter the TR-069 password for authentication with the auto-configuration server. WAN Interface used Select a WAN interface through which the TR-069 traffic passes. by TR-069 client If you select Any_WAN, you should also select the pre-configured WAN connection(s). Display SOAP messages on serial console Select Enable to show the SOAP messages on the console. Connection Request Select this option to enable authentication when there is a connection request from the Authentication ACS. Connection Request User Name Enter the connection request user name. When the ACS makes a connection request to the Device, this user name is used to authenticate the ACS. Connection Request Password Enter the connection request password. When the ACS makes a connection request to the Device, this password is used to authenticate the ACS. Connection Request This shows the connection request URL. URL The ACS can use this URL to make a connection request to the Device. Local certificate used by TR-069 client You can choose a local certificate used by TR-069 client. The local certificate should be imported in the Security > Certificates > Local Certificates screen. Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. 332 SBG3300-N Series User's Guide