ZyXEL SBG3300-NB00 User Guide - Page 86
Configuring the Default_L2TPVPN IPSec VPN Rule Server
View all ZyXEL SBG3300-NB00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 4 Tutorials The example uses the following settings in setting up a basic L2TP VPN tunnel. Figure 15 L2TP VPN Example 172.16.1.2 LAN Subnet #1: 192.168.1.0/24 LAN Subnet #2: 192.168.2.0/24 L2TP VPN IP Address Pool: 10.2.1.1 - 10.2.1.32 • The Device has a static IP address of 172.16.1.2 for the DSL WAN interface. • The remote user has a dynamic IP address and connects through the Internet. • Use the default IP address pool to assign the remote users a point-to-point IP addresses from 10.2.1.1 to 10.2.1.32 for use in the L2TP VPN tunnel. • The access group configuration allows the remote L2TP user to access only the LAN subnet 192.168.2.0/24. 4.13.1 Configuring the Default_L2TPVPN IPSec VPN Rule (Server) 1 Go to the VPN > IPSec VPN screen which lists the VPN rules. Click the Edit icon of the Default_L2TPVPN entry. 2 Select the Enable checkbox. 3 Select Pre-Shared Key and configure a password. This example uses 1234567890. 86 SBG3300-N Series User's Guide