ZyXEL SBG3300-NB00 User Guide - Page 226
Add/Edit Port Forwarding
View all ZyXEL SBG3300-NB00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Chapter 11 Network Address Translation (NAT) Table 53 Network Setting > NAT > Port Forwarding (continued) LABEL Protocol Modify DESCRIPTION This shows the IP protocol supported by this virtual server, whether it is TCP, UDP, or TCP/ UDP. Click the Edit icon to edit this rule. Click the Delete icon to delete an existing rule. 11.2.1 Add/Edit Port Forwarding Click Add new rule in the Port Forwarding screen or click the Edit icon next to an existing rule to open the following screen. Figure 75 Port Forwarding: Add/Edit The following table describes the labels in this screen. Table 54 Port Forwarding: Add/Edit LABEL Active Service Name WAN Interface DESCRIPTION Clear the checkbox to disable the rule. Select the check box to enable it. Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on). Select the WAN interface through which the service is forwarded. WAN IP Start Port You must have already configured a WAN connection with NAT enabled. Enter the WAN IP address for which the incoming service is destined. If the packet's destination IP address doesn't match the one specified here, the port forwarding rule will not be applied. Enter the original destination port for the packets. To forward only one port, enter the port number again in the End Port field. To forward a series of ports, enter the start port number here and the end port number in the End Port field. 226 SBG3300-N Series User's Guide