ZyXEL SBG3300-NB00 User Guide - Page 65
PPTP VPN Tutorial
View all ZyXEL SBG3300-NB00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 4 Tutorials Note: The Peer Gateway Address is not shown in the screen because it is an unknown IP address to the remote access VPN client. Note: The policy for the remote VPN client is not shown in the screen because it is an unknown to the remote access VPN client. 4.12 PPTP VPN Tutorial The example uses the following settings in setting up a basic PPTP VPN tunnel. Figure 14 PPTP VPN Example 172.16.1.2 LAN Subnet #1: 192.168.1.0/24 LAN Subnet #2: 192.168.2.0/24 PPTP VPN IP Address Pool: 10.1.1.1 - 10.1.1.32 • The Device has a static IP address of 172.16.1.2 for the DSL WAN interface. • The remote user has a dynamic IP address and connects through the Internet. • Use the default IP address pool to assign the remote users a point-to-point IP addresses from 10.1.1.1 to 10.1.1.32 for use in the PPTP VPN tunnel. • The access group configuration allows the remote user to access only the LAN subnet #1 192.168.1.0/24. 4.12.1 Configuring PPTP VPN Setup (Server) 1.Go to the VPN > PPTP VPN > Setup screen and configure the following. • Select the Enable checkbox. • Set Access Group 1 to 192.168.1.0/255.255.255.0. • Select DNS as User Defined and enter a DNS server address. The DNS server address in this example is 8.8.8.8. SBG3300-N Series User's Guide 65