ZyXEL SBG3300-NB00 User Guide - Page 40
Using WPS
View all ZyXEL SBG3300-NB00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 4 Tutorials 4.3.2 Using WPS This section shows you how to set up a wireless network using WPS. It uses the Device as the AP and ZyXEL NWD210N as the wireless client which connects to the notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCMCIA card). There are two WPS methods to set up the wireless client settings: • Push Button Configuration (PBC) - simply press a button. This is the easier of the two methods. • PIN Configuration - configure a Personal Identification Number (PIN) on the Device. A wireless client must also use the same PIN in order to download the wireless network settings from the Device. Push Button Configuration (PBC) 1 Make sure that your Device is turned on and your notebook is within the cover range of the wireless signal. 2 Make sure that you have installed the wireless client driver and utility in your notebook. 3 In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button (Start or WPS button). 4 Log into Device's web configurator and go to the Network Setting > Wireless > WPS screen. Enable the WPS function and click Apply. Then click the Connect button. Note: You must enable the Wireless function in the Network Setting > Wireless > General screen before you can enable the WPS function. 40 SBG3300-N Series User's Guide