ZyXEL SBG3300-NB00 User Guide - Page 231
The DMZ Screen
View all ZyXEL SBG3300-NB00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Chapter 11 Network Address Translation (NAT) Table 58 Port Triggering: Configuration Add/Edit (continued) LABEL Open Start Port DESCRIPTION The open port is a port (or a range of ports) that a server on the WAN uses when it sends out a particular service. The Device forwards the traffic with this port (or range of ports) to the client computer on the LAN that requested the service. Open End Port Open Protocol OK Cancel Type a port number or the starting port number in a range of port numbers. Type a port number or the ending port number in a range of port numbers. Select the transport layer protocol from TCP, UDP, or TCP/UDP. Click OK to save your changes. Click Cancel to exit this screen without saving. 11.5 The DMZ Screen In addition to the servers for specified services, NAT supports a default server IP address. A default server receives packets from ports that are not specified in the NAT Port Forwarding Setup screen. Figure 81 Network Setting > NAT > DMZ The following table describes the fields in this screen. Table 59 Network Setting > NAT > DMZ LABEL DESCRIPTION Group Name Select the name of an interface group that was created in the Network Setting > Interface Group screen. The DMZ host must be in the same subnet as the selected interface group. Default Server Enter the IP address of the default server which receives packets from ports that are not Address specified in the NAT Port Forwarding screen. Apply Cancel Note: If you do not assign a Default Server Address, the Device discards all packets received for ports that are not specified in the NAT Port Forwarding screen. Click Apply to save your changes. Click Cancel to restore your previously saved settings. SBG3300-N Series User's Guide 231