eMachines D620 Service Guide - Page 57
Make sure the cables are routed well before connecting the cables back to the unit.
View all eMachines D620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
16. Disconnect the cover switch cable from the mainboard. 17. Turn the system over and remove the two screws (E) from the base of the unit. Step 1~2 Size (Quantity) M2.5 x L6 (2) Color Black 18. Remove the two screws (E) from the left and right hinge of the LCD module. Torque 3.0 kgf-cm Step 1~2 Size (Quantity) M2.5 x L6 (2) 19. Carefully remove the LCD module from the base unit. Color Black Torque 3.0 kgf-cm NOTE: Make sure the cables are routed well before connecting the cables back to the unit. Chapter 3 67
Chapter 3
67
16.
Disconnect the cover switch cable from the mainboard.
17.
Turn the system over and remove the two screws (E) from the base of the unit.
18.
Remove the two screws (E) from the left and right hinge of the LCD module.
19.
Carefully remove the LCD module from the base unit.
NOTE:
Make sure the cables are routed well before connecting the cables back to the unit.
Step
Size (Quantity)
Color
Torque
1~2
M2.5 x L6 (2)
Black
3.0 kgf-cm
Step
Size (Quantity)
Color
Torque
1~2
M2.5 x L6 (2)
Black
3.0 kgf-cm