eMachines D620 Service Guide - Page 90
Peripheral-Related Symptoms, Symptom / Error, Check or do the following in sequence - windows 7 drivers
View all eMachines D620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Power Management-Related Symptoms Symptom / Error The system doesn't resume from standby mode after opening the LCD. Battery fuel gauge in Windows doesn't go higher than 90%. System hangs intermittently. Check or do the following in sequence • LCD cover switch • Mainboard • Remove battery pack and let it cool for 2 hours. • Refresh battery (continue use battery until power off, then charge battery). • Battery pack • Mainboard • Reconnect hard disk/CD-ROM drives. • Hard disk connection board • Mainboard Peripheral-Related Symptoms Symptom / Error System configuration does not match the installed devices. External display does not work correctly. USB does not work correctly Print problems. Check or do the following in sequence • Run "Load Setup Defaults" in BIOS Setup Utility, then reboot system. • Reconnect hard disk/CD-ROM/diskette drives. • Press Fn+F5 to switch to LCD or CRT • Mainboard • Mainboard • Run printer self-test. • Printer driver • Printer cable • Printer • Mainboard Keyboard/Touchpad-Related Symptoms Symptom / Error Keyboard (one or more keys) does not work. Touchpad does not work. Check or do the following in sequence • Reconnect the keyboard cable. • Keyboard • Mainboard • Reconnect touchpad cable. • Touchpad board • Mainboard 100 Chapter 4