eMachines EL1210 MU.NAE00.001 - eMachines Desktop Hardware Reference Guide - Page 52

Printer

Page 52 highlights

Chapter 3: Troubleshooting • If your computer is plugged into a surge protector, make sure that the surge protector is connected securely to an electrical outlet, turned on, and working correctly. To test the outlet, plug a working device, such as a lamp, into the outlet and turn it on. • Make sure that the power cord is free from cuts or damage. Replace any damaged cables. Printer The printer will not turn on • Make sure that the printer is online. Many printers have an online/offline button that you may need to press. • Make sure that the power cable is plugged into an AC power source. The printer is on but will not print • Check the cable between the printer and your computer. Make sure that it is connected to the correct port. • Make sure that the printer is online. Many printers have an online/offline button that you may need to press so the printer can start printing. Press the button to put the printer online. • Check the cable for bent or broken pins. • If the printer you want to print to is not the default printer, make sure that you have selected it in the printer setup. To set a default printer: 1 Click Start, then click Control Panel. The Control Panel window opens. If your Control Panel is in Category View, click Printers and Other Hardware. 2 Click/Double-click the Printers and Faxes icon. The Printers and Faxes window opens. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

Chapter 3: Troubleshooting
42
If your computer is plugged into a surge
protector, make sure that the surge protector is
connected securely to an electrical outlet, turned
on, and working correctly. To test the outlet,
plug a working device, such as a lamp, into the
outlet and turn it on.
Make sure that the power cord is free from cuts
or damage. Replace any damaged cables.
Printer
The printer will not turn on
Make sure that the printer is online. Many
printers have an online/offline button that you
may need to press.
Make sure that the power cable is plugged into
an AC power source.
The printer is on but will not print
Check the cable between the printer and your
computer. Make sure that it is connected to the
correct port.
Make sure that the printer is online. Many
printers have an online/offline button that you
may need to press so the printer can start
printing. Press the button to put the printer
online.
Check the cable for bent or broken pins.
If the printer you want to print to is not the
default printer, make sure that you have selected
it in the printer setup.
To set a default printer:
1
Click
Start
, then click
Control Panel
.
The
Control Panel
window opens. If
your Control Panel is in Category
View, click
Printers and Other
Hardware
.
2
Click/Double-click the
Printers and
Faxes
icon. The
Printers and Faxes
window opens.