eMachines EL1360 User Guide - Page 41

Memory card reader, Modem cable or DSL, Modem dial-up

Page 41 highlights

You see a "Not enough memory" error message • Close all programs, then restart your computer. Memory card reader Drive letters for the memory card slots do not appear in the My Computer window • Reboot your computer. Modem (cable or DSL) • See the documentation that came with your modem for additional troubleshooting information. Modem (dial-up) See also "Internet" on page 28. Your modem does not dial or does not connect • Make sure that the modem cable is plugged into the modem jack and not the Ethernet network jack. See your setup poster to make sure that the connections have been made correctly. • Make sure that your computer is connected to the telephone line and the telephone line has a dial tone. • Make sure that the modem cable is less than 6 feet (1.8 meters) long. • Remove any line splitters or surge protectors from your telephone line, then check for a dial tone by plugging a working telephone into the telephone wall jack. • If you have additional telephone services such as call waiting, call messaging, or voice mail, make sure that all messages are cleared and call waiting is disabled before using the modem. Contact your telephone service to get the correct code to temporarily disable the service. Also make sure that the modem dialing properties are set correctly. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

31
You see a “Not enough memory” error message
Close all programs, then restart your
computer.
Memory card reader
Drive letters for the memory card slots do not
appear in the My Computer window
Reboot your computer.
Modem (cable or DSL)
See the documentation that came with your
modem for additional troubleshooting
information.
Modem (dial-up)
See also
“Internet” on page 28
.
Your modem does not dial or does not connect
Make sure that the modem cable is plugged
into the modem jack and not the Ethernet
network jack. See your setup poster to make
sure that the connections have been made
correctly.
Make sure that your computer is connected
to the telephone line and the telephone line
has a dial tone.
Make sure that the modem cable is less than
6 feet (1.8 meters) long.
Remove any line splitters or surge protectors
from your telephone line, then check for a
dial tone by plugging a working telephone
into the telephone wall jack.
If you have additional telephone services
such as call waiting, call messaging, or voice
mail, make sure that all messages are cleared
and call waiting is disabled before using the
modem. Contact your telephone service to
get the correct code to temporarily disable
the service. Also make sure that the modem
dialing properties are set correctly.